GLASS EDGE REFINING TOOL
Removes Sharp Edges Quickly & Safely
US AND FOREIGN PATENTS PENDING
US AND FOREIGN PATENTS PENDING
A simple, yet essential tool for hobbyists and professionals, designed to enhance safety when preparing glass edges for foiling or lead came assembly.
Two extra-fine stones work in parallel to refine both glass edges, further enhanced by a patent-pending notch that allows THE EDGER to reach into the tightest inside curves. Just one pass along the glass edge is enough to smooth out and eliminate dangerous, razor-sharp protrusions.
Features:
Works With All Glass Types
• Small Cut Pieces To Full Size Sheets
• Smooth & All Varieties of Textured Glass
• Accommodates Glass Thicknesses of 1/16″ to 1/4″ (1.6-6.4mm)
A Must-Have Tool for Professional Glass Artists, Hobbyist, and Instructors.
THE EDGER features two fine-grit abrasive stones, perfectly aligned to smooth both edge-corners, whether you’re working on a straight edge or an inside curve.
Just one quick pass is enough to remove those sharp, hazardous bits and jagged spikes on all kinds of textured glass.
THE EDGER features two fine-grit abrasive stones, perfectly aligned to smooth both edge-corners, whether you’re working on a straight edge or an inside curve.
The front face of THE EDGER with abrasive stones, showing primary working surface for straight edged pieces.
Overhead view of THE EDGER showing the patent-pending notch, allowing the device to smooth razor-sharp edges on the tightest curves.
English (in)
H: 3.75"
D: 1.25"
Metric (cm)
H: 9.50 cm
D: 3.15 cm
English
Metric